ABBA SPB12 Manual de instalación - Página 3
Navegue en línea o descargue pdf Manual de instalación para Iluminación paisajística ABBA SPB12. ABBA SPB12 3 páginas.
Imprimir páginafixture(s) must be installed in accordance with all local codes and ordinances.
Do not instal within 10 feet of a pool, spa or fountain
INSTALLATION INSTRUCTION
To ensure optimal performance and safety, it is important to
use our fixtures ONLY with a low voltage landscape
transformer. This transformer reduces the voltage from
120V to 12V, making it safe and suitable for outdoor use.
When
installing
the
fixture(s),
instructions carefully:
1. Before installation, please ensure that the power is turned
off for your safety.
2.To establish a dependable and enduring electrical
connection between fixture wires and the main line in
outdoor or underground installations, it is essential to select
a suitable main cable connector designed for direct burial.
This connector should be chosen based on its ability to
withstand environmental conditions, resist moisture and
corrosion, and provide robust insulation. By adhering to
industry standards and best practices, including proper wire
stripping and secure fastening techniques, a reliable
connection
can
be
performance, safety, and longevity of the system.
We recommend using WN12 waterproof wire nuts (sold
separately) for optimal connectivity.
3. Attach the fixture(s) wires to the main cable connector
suitable for direct burial and use waterproof wire nuts.
WN12 (Sold separately).
4. For a secure and stable mounting, dig a small hole and
insert the spike into the ground, ensuring it is vertical and
firm.
5. Remove the lens from the fixture.
6. Adjust the wattage you want to set ranging from 3W to
12W
7. Place the lens back onto the fixture.
8. Adjust the light angle.
9. Turn on the power.
We strongly recommend that the main cable from the transformer be buried
underground for safety reasons. Additionally, please be sure to avoid
exceeding the maximum wattage on the fixture(s) to prevent any damage or
hazards.
CAUTION:
please
follow
established,
ensuring
www.ABBALightingUSA.com
1 PIN UP:3W
2 PIN UP:5W
3 PIN UP:7W
4 PIN UP:9W
these
5 PIN UP:12W
optimal
Connect the wires using
WN12 (Sold separately)
Main Line