Disc Makers MacElite 4 Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Duplicadora de discos Disc Makers MacElite 4. Disc Makers MacElite 4 17 páginas. Elite series
Imprimir página2
Elite2 for Mac Getting Started Guide
also be set up away from direct sunlight or very strong artificial light; the optical
sensors inside the unit may not operate properly if ambient light levels are too high.
For consistent duplication results, whether attended or unattended, we strongly
recommend the use of an Uninterruptible Power Supply (UPS) for isolating the
duplication system and printer from the effects of AC power fluctuations or brief
power outages. An AC power strip with line filtering and surge protection offers
some protection if you do not use a UPS device.
Meeting the setup requirements
The Elite2 duplicator performs most effectively when used in combination with a
dedicated, reasonably modern computer system that meets or exceeds the follow-
ing requirements:
Computer hardware requirements
Minimum: Macintosh system powered
by a 800GHz or faster PowerPC G5
processor. (Discribe does not currently
run with the Intel* Core Solo or the
Intel* Core Duo processor.)
Minimum: 7200 rpm 40-Gigabyte hard
drive with 70-percent free space
512MB memory
An available USB 2.0 port
Note: Many early Macintosh comput-
ers only have USB 1.0 ports, which are
too slow to operate with the Elite2
duplicator. Various USB 2.0 upgrade
options are available for these systems;
check with your Macintosh dealer for
details.
Note: If you are using Mac OS X 10.2 or later, the Mac OS Extended formatting
(HFS Plus) minimizes the problems of fragmented file storage on disk drives. Under
most conditions, optimizing the hard disk drive is not necessary to ensure efficient
disc duplication with the Elite2. If you are running Mac OSX 10.3 Panther or above,
a process known as Hot-File Adaptive-Clustering automatically defragments any
discontinuous files.
Operating system requirements
Mac OS X Version 10.3.7 or higher