DISCO DAC552 Manual de instalación - Página 17

Navegue en línea o descargue pdf Manual de instalación para Sierra DISCO DAC552. DISCO DAC552 20 páginas. Automatic dicing/cutting saws

General safety precautions

- Proper installation of safety device

- Air exhaust, water drainage and contamination control

- Exhaust sampling port

- Facility side interlock connection terminal (Special user

- Machine relocation/disposal

If the covers or other parts with safety interlocks are broken,

immediately stop the machine and repair broken parts.

Since harmful substance may be generated depending on the

cutting work type and machining characteristics, air exhaust, water

drainage and contamination control/disposal must be properly

completed in compliance with applicable environmental protection

codes.

The machine requires an exhaust operation. When measuring the

exhaust for the machine to fulfill legal requirements, use the

sampling port, which is provided at the location indicated below.

(connection port: Rc1/4)

specification)

To permit the facility side to provide air exhaust and water drainage

interlock, the machine is equipped with air exhaust and water

drainage reservoir tank interlock connection terminals.

When connecting these terminals to the facility side interlock

system, contact your nearest DISCO office.

In the case of relocation or disposal of the machine, the

presentation of detailed precautionary notes and the management

of new installation site data will be done by DISCO.

If you want to relocate or dispose the machine, contact your nearest

DISCO office or DISCO service office.

NOTICE

Sampling port

[Rc1/4]

A-3

Continued

Duct