Armytek Predator G109.1 Manual - Página 5

Navegue en línea o descargue pdf Manual para Linterna Armytek Predator G109.1. Armytek Predator G109.1 8 páginas.

Imprimir página

within 1 minute and the flashlight exits from the Setting Mode

into the standard operation one without saving your selection.

Second Line and General Setting Menu

When in the Second Line, you might set all 5 mode types: the special

signals as well as the stabilized light modes and their brightness.

At first, switch on to the mode requiring setting, and then change it.

Also, you might perform the general settings of the flashlight from

any mode of this Line: change the number of the modes in both lines,

reset the flashlight settings to the factory default ones, select the

brightness stabilization type, change the voltage supply selection,

and set the method of auto memorizing of the last activated mode.

General Setting Menu Control

Setting Menu entry: when the flashlight is on and its head is

loosened it is required to tighten the head (more than for 1

second), then loosen the head relative to body by ¼ turn (within

3 seconds) and switch on/off the flashlight with click. This entry

is developed to prevent the accidental entry in this mode.

Menu indication: when entering the menu item your flashlight

shows its number with the help of indication. For instance, if it

flashes 3 times from low level of brightness to high one, the Item

3 is chosen.

Switching between the Menu options: switch on/off the

flashlight with click.

Menu selection confirmation: tighten/loosen the flashlight head

within 1 second. It enters the selected Menu item for further

setting (or it exits from the Setting Menu into the standard

operation mode if your selection is final). If you do not make your

choice within 1 minute, your flashlight exits from the Setting

Menu into the standard operation mode without saving your

selection.

Item 1. Mode Selection and Setting

Entry: the flashlight will show the Item 1 by flashing for 1 time;

when confirming by tightening/loosening the head, your

flashlight shows 5 available modes through indication with the

pauses between in the following sequence:

Strobe – frequent blinking at the same frequency

Firefly – switching-on to the ultra low mode

Beacon – 1 flash per several seconds

SOS – the light flash according to the Morse code

Stabilized light – constant bright light

Selection confirmation: tighten/loosen the flashlight head within

1 second while the required choice is activated or the flashlight

pauses after it. If you do not make your choice within 1 minute,

your flashlight exits from the Setting Menu into the standard

operation mode without saving your selection.

When choosing the modes Beacon, SOS or Firefly, your

flashlight saves your preferences and changes the Setting

Mode to the standard operation one.

When choosing the mode Strobe, your flashlight starts to

change the strobe frequency from 1Hz to 50Hz within 30

seconds. When the flashlight head is tightened, it pauses

and you might choose the current mode. The repeated

slight loosening of the head allows keeping on the cycle.

When maximum brightness is reached, your flashlight

starts changing its brightness according to the circle cycle

from zero. The flashlight saves your choice after

confirmation by tightening/loosening the head, and it

changes the Setting Mode to the standard operation one.

When choosing the mode Stabilized light, your flashlight

starts to increase the constant brightness of the stabilized

light. It comes though the whole circle cycle within 40

seconds pausing with double blinking at 25%, 50%, 75%

and 100% of brightness. When the flashlight head is