Armytek Optoelectronics Wizard Pro Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Linterna Armytek Optoelectronics Wizard Pro. Armytek Optoelectronics Wizard Pro 2 páginas.
También para Armytek Optoelectronics Wizard Pro: Manual del usuario (2 páginas)

Imprimir página

The flashlight will get hot in Turbo mode quickly and discharge the battery by high current. Don't leave it without your attention as very

bright light can heat objects and be a cause of the fire.

1. Always follow the instructions from this manual and recommendations on battery usage.

2. Apply only the recommended power sources.

3. Do not reverse battery polarity.

4. Do not use different power sources together, i.e. old ones with new ones, charged with

discharged. Do not use different types of batteries combined as the element with less

capacity can be damaged.

5. Do not modify or recast the flashlight and its components as it will deprive you of the

warranty.

6. Do not allow water or any other liquid to leak into the flashlight.

7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary

blindness.

8. Do not allow children to use the flashlight without your assistance.

The producer will not be liable for any harm done to the user if it was caused by

improper use of the product.

Care and Storage

It is recommended to clean the threads and O-rings off dirt and old grease once or twice per year. Remember that reliable protection

from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and

sealing rings.

To clean the threads do the following:

1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).

2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged

replace it by a new one.

3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as

it can cause fails in functionality of the flashlight.

After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of

automotive and other improper grease can cause swelling and damage of the sealing rings.

In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts

as often as required.

We DO NOT RECOMMEND to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable) can

leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in then use

new and high-quality batteries and store the flashlight in acceptable for batteries operational temperature and revise the batteries' state at least

once a month. If you have noticed any signs of batteries' defects then withdraw them from the flashlight and utilize. It is also recommended to

replace discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries.

Service and Warranty

Armytek provides free warranty repair for 10 years from the date of purchase.

Warranty doesn't cover damage caused by:

1. Improper usage.

2. Attempts to modify or repair the flashlight by nonqualified specialists.

3. Longtime application in chlorinated or polluted water, or other liquids (other than water).

4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).

5. Usage of low-quality batteries.

Armytek Optoelectronics Inc.

Web: www.armytek.com Email: [email protected]

Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada

Specifications are subject to change without notice.

Warnings

Wizard

THE MOST TECHNICALLY ADVANCED

FLASHLIGHTS IN THE WORLD

USER MANUAL

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

Specifications

Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your

needs. The components made in the USA and Japan.

10 years no-hassle warranty

Superb light of amazing constant brightness due to powerful electronics and active temperature control without timers.

Multi-flashlight "10 in 1" is for many activities: car, fishing, hunting, home, work, city, picnic, bike, outdoor, travel.

Efficient TIR-optics and no "tunnel vision" effect even after continuous use.

Warning Indication of low battery level and real-time temperature control.

Side switch for comfortable one-hand operation and easy modes switching with advanced operation.

Multicolor State Indication and ultra low current drain in OFF-state more than 25 years.

Comfortable headband for reliable fixation of the flashlight – it won't slip even while you're running.

Solid body without long wires, weak rubber connectors and unnecessary boxes.

Removable magnet in the tailcap, removable clip, strong lanyard and possibility of tail-stand for multipurpose use.

Total protection from water, dirt and dust penetration – flashlight continues to work even at the depth of 10 meters.

Model

Wizard Pro XHP50

LED / Optics

Cree XHP50 / TIR

Brightness stabilization type

Light output, LED / OTF lumens*

2300 / 1800

Peak beam intensity, candelas

4200

Hotspot / spill

70° / 1 20°

Beam distance*

130 meters

Turbo2

1800 lm / 1h

Turbo1

900 lm / 1.7h

Main3

390 lm / 4h

Main2

165 lm / 10.5h

Modes and runtimes

Main1

30 lm / 50h

(measured with 18650 Li-Ion

3400mAh until the light output

Firefly3

5.5 lm / 40d

drops to 10% of the initial

Firefly2

1.5 lm / 40d

value)

Firefly1

0.15 lm / 200d

Strobe3

10Hz / 1800lm / 2h

Strobe2

1Hz / 1800lm / 5h

Strobe1

1Hz / 165lm / 52h

Power source

1x18650 Li-Ion / 2x18350 Li-ion / 2xRCR123 Li-ion / 2xCR123A

Size and weight (without batteries)

Length 101mm, body diameter 24.5mm, head diameter 29mm, weight 48g

* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.

We DO NOT RECOMMEND to use low-quality CR123A batteries, because they can explode. Turbo mode needs rechargeable

18650 Li-Ion batteries without PCB (unprotected) or with PCB which guarantees 7A discharge current for stable work.

–

Wizard Pro XP-L

Cree XP-L / TIR

FULL (constant light)

1250 / 1000

3560

70° / 120°

119 meters

1000 lm / 1.3h

720 lm / 1.8h

390 lm / 3.5h

180 lm / 8.5h

60 lm / 18h

7.5 lm / 6d

2.3 lm / 18d

0.4 lm / 100d

10Hz / 1000lm / 2.7h

1Hz / 1000lm / 6.7h

1Hz / 180lm / 42h