Discount Car Stereo IL-CMD Manual de instalación de inicio rápido - Página 3
Navegue en línea o descargue pdf Manual de instalación de inicio rápido para Sistema estéreo del coche Discount Car Stereo IL-CMD. Discount Car Stereo IL-CMD 5 páginas. For mercedes comand2.0aps not for mercedes: mcs or comand 2.5
Imprimir página
Warning: If factory C2 plug has more than 4 wires, you are required to
transfer the additional wires over to the IL-CMD 18-pin contact carrier OR
transfer 4 wires from IL-CMD to factory 18-pin contact carrier--- your
choice!!
Removing wires from contact carrier
Remove contact carrier from both factory radio plug and that of the IL-CMD.
Release pins from contact carrier by straightening (flattening) locking tab (6)
using flat screwdriver or similar (7) after which wires can be pulled from
contact carrier (8) (See Fig. 3)
The IL-CMD wires are:
Pin 4 (red), 5 (black), 14 (black) and 15(white) (See Fig. 4)
Noteworthy: If transferring factory wires to IL-CMD contact carrier, we
recommend noting pin (color) and location prior or transfer one by one.
Prior to re-inserting pin to contact carrier, you must lift tabs allowing
pins to lock in place
Fig. 3
Fig. 4
contact carrier
1.
Re-install 18-pin contact carrier to plug housing.
2. Reconnect 18-pin plug to chamber C2 on radio
3. Disconnect 8-pin plug from chamber "A" (See Fig. 1) and connect
power harness mating connector (See Fig. 6)
4. Connect power harness 8-pin plug to chamber" A" vacated in step 3.
Fig. 5