Discount Car Stereo A2D-JAG97 Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Accesorios para automóviles Discount Car Stereo A2D-JAG97. Discount Car Stereo A2D-JAG97 7 páginas. Music streaming for select 1986-97 jaguar

PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
Requirements
Radio with TAPE/CD button on faceplate and 8-pin port
Introduction
10/21 Update: Module for vehicles with CD changer supports Bluetooth 5.0 and
Bluetooth 4.2 remain for vehicles without CD changer.
12/28/21 Update: Installation 3 has changed allowing customers to install
module at CD changer socket in trunk/hatch or at the radio (your choice)
Portable audio products are everywhere, reflecting demand from active people
all over the world to take their music on the road. The A2D-JAG97 provides
Bluetooth music streaming solution from any A2DP device to allow Jaguar
owners to stream audio books, Apple music, turn by turn directions and more
directly into audio system via the CD changer port. The A2D-JAG97 is compatible
with Jaguar CD changer controlling radios with or without optional CD changer.
Vehicles with optional CD changer have the option to retain or disconnect it.
Dependent on vehicle options, this module may be installed at the radio or to the
CD socket in trunk/hatch. See installation 1, 2 & 3.
See Frequently Asked question at the end of this guide for more details.
Installation 1: at the radio
Vehicles without CD changer may opt to install module at the radio or to CD
changer socket in trunk/hatch-
longer function.
Warning: Installation 1 applies to vehicles without CD changer or if CD changer
is disconnected or malfunctions. If you would rather not remove radio and
vehicle is pre-wired to trunk or hatch (See Fig. 3); you may opt to connect
.
module there instead. (See installation 2 on page 3.)
Click
XK models differ slightly.
1.
2.
(vehicles without CD changer)
CD changer must be disconnected and will no
here
to remove radio or click link below for dash removal instruction video.
https://www.youtube.com/watch?v=vpAIdr6V3iE
Disconnect CD plug (if present) from radio "CD" socket (See Fig.2)
Connect module 8—pin plug (See Fig. 1) to radio "CD" input socket (See
Fig. 2)
2. Re-assemble dashboard and proceed to "Pairing" on page 4
Fig. 1
Fig. 2