BLADEZ QUANTUM Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Entrenador elíptico BLADEZ QUANTUM. BLADEZ QUANTUM 19 páginas. Elliptical trainer

E. Training in TARGET H.R. control

The load difficulty will be auto-adjusted according to the current heart rate received. There are 2

ways the console receives your heart rate:

Through both of the Hand Grip Sensor handles at the bottom of the console

Through the console plug-in Wireless Receiver Module. A heart rate chest strap (optional

accessory available for purchase) must be worn throughout the workout

If your heart rate is under the targeted value, the load difficulty will increase one level each 30

seconds, up to the maximum level 16. As soon as your heart rate is achieved at the target pulse,

load difficulty will decrease one level immediately, and keep decreasing one level each 15

seconds until level reaching level 1.

If the heart rate received is still over (or equal to) the targeted value for 30 seconds when tension

is already at level 1, the console will STOP and sounds 6 audible beeps to remind you as the

training protection.

To stop your training:

F. Training with PRESET function data:

As soon as the preset function data counting down to zero, the console sounds 8 beeps as a

reminder. At this moment, the console will stop the workout. You may press START/STOP

button to start the workout and counting up from the previous data.

G. Interrupt training:

During the workout, you may press START/STOP button to stop the training any time.

H. To reset program:

You may press RESET button to reset the PROGRAM and select the training mode and load

difficulties under STOP mode. By pressing and holding the RESET button for 2 seconds, all data

(including personal data) will be reset completely to factory default.

Button Functions

START/STOP: to start or stop training

MODE:

to select each function of Time, Distance, Pulse presetting

UP:

to increase or to scroll up

DOWN:

to decrease or scroll down

RESET:

1. To reset each function of Time, Distance, Pulse function figures.

2. To reset program setting and back to initial selection mode with Manual, Program,

User, or Target Heart Rate all blinking display.

RECOVERY:

to check pulse recovery status – User must use Hand Grip sensors or wears chest strap

TOTAL RESET: to clear all setting to the monitor.

CONSOLE OPERATIONS (cont'd)

Quantum