Acorn Safety S0000-AL3 Instrucciones de instalación, uso y mantenimiento - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación, uso y mantenimiento para Sistema de seguridad Acorn Safety S0000-AL3. Acorn Safety S0000-AL3 9 páginas.

Imprimir página

Installation & Operation Manual

PRELIMINARY STEPS

1. Read the installation instructions prior to beginning the installation.

2. Separate parts from packaging and verify all necessary parts are accounted for and undamaged. Obtain missing or

damaged parts from Acorn Safety prior to beginning installation.

3. Flush water supply lines prior to installation. This will remove unwanted debris from the lines and prevent unwanted

blockages in the safety equipment.

4. In order to comply with ANSI Z358.1, the safety equipment must be inspected periodically. An inspection tag is provided for

documentation purposes.

5. All employees at risk of contamination should be informed and trained in the use of this and any other safety equipment.

The signage provided should be posted appropriately in close proximity to this equipment.

ROUGH-IN

S0000-AL3 FLUSH MOUNT

ALARM HORN

90 dB AT 10 FEET

5 1 2 " SQ.

(140)

KEEP SWITCH

BODY VERTICAL

12"

[305]

FLOW

6" MIN

[150]

GENERAL NOTES:

1. ALL DIMENSIONS ARE IN INCHES [MM].

2. FLOW SWITCH SHALL BE INSTALLED VERTICALLY WITH HORIZONTAL FLOW.

3. DIRECTION OF WATER FLOW MUST BE IN SAME DIRECTION AS SHOWN ON FLOW SWITCH.

4. J-BOX AND J-BOX EXTENSION BY OTHERS.

Acorn Safety

a division of Acorn Engineering

Manual #7109-305-001

HORN / STROBE

ASSEMBLY

AMBER STROBE

1 FLASH PER SECOND

" NPTI CONDUIT

CONNECTION

125 / 250VAC, 5A DPDT

DOUBLE POLE, DOUBLE

THROW FLOW SWITCH

6" MIN

[150]

4 7 8 " (125)

2 1 2 " (65)

8 " (15)

FLUSH MOUNTING

J-BOX & J-BOX EXTENSION

UNIONS & PIPE

SUPPLIED BY OTHERS

Page 2 of 9

HANGER

PLATE

BY OTHERS

Revised: 12/10/18