Blagdon AMPHIBIOUS A3000 Folleto - Página 10
Navegue en línea o descargue pdf Folleto para Bombas para estanques Blagdon AMPHIBIOUS A3000. Blagdon AMPHIBIOUS A3000 16 páginas.
Imprimir página
- 1. Table of Contents
- 2. Getting to Know Your Amphibious Pump
- 3. Pump Performance / Flow Charts
- 4. Technical Specifications
- 5. Installation
- 6. Electrical Installation
- 7. Maintenance and Cleaning
- 8. Cleaning
- 9. Routine Maintenance
- 10. Monthly Maintenance
- 11. Annual Maintenance
- 12. Winter Storage
- 13. Troubleshooting
- 14. Faults - Problem Procedure
- 15. Consumer Advice Contact Details
- 16. Guarantee
Amphibious Pump Leaflet 2.qxd
Water Feature / Filter / Waterfall
Install as for Fountain. Depending on water feature to be supplied, your Amphibious
pump can be used with the dual control T-piece 1" 1 /4" 1 /2" hose fitting (see
"Adjusting dual control T-piece" diagram). Hose clips should be used to secure hose.
Tip:
The larger 1" hose fitting will give maximum pump flow performance. If you do not
require a fountain a significant increase in performance will be gained by connecting the
hose fitting directly to the pump outlet flange.
• Ensure pipe work is not blocked, leaking or is laid so that it gets crushed
or kinked.
• Keep the height that water is to be pumped from the water surface (called
Head) to a minimum. The higher the head the lower the flow rate and the
more wear on the pump.
• Use the largest diameter, smoothest bore pond hose over the shortest
distance and keep hose fittings to a minimum. This removes frictional loss
of flow and so increases pump flow rates.
Also see the explanatory diagram on the top face of your Amphibious pump carton.
MAINTENANCE & CLEANING
!
Blagdon Amphibious pumps are centrifugal pumps with a magnetic impeller
movement driven by a watertight asynchronous motor. They require minimum
cleaning, only periodic cleaning of the pre-filter and impeller is necessary.
Cleaner
The use of Blagdon Pond Pump Cleaner will give improved performance and
pump life by removing built-up lime scale and waste. Use before dismantling
for easier, cleaner handling.
Tip:
New ponds and ponds in hard water areas will cause lime scale to build-up more
quickly. Dip your pump more frequently with Blagdon Pond Pump Cleaner to maintain
optimum performance.
8
INSTALLATION
Warning - Failure to carry out routine maintenance leaving the
pump under reduced or no flow conditions for long periods
(e.g. blocked pre-filter) will result in a shorter pump life and will
invalidate the guarantee.
30/3/06
13:33
Page 10