DiscountRamps Silver Spring THR15 Instrucciones - Página 3
Navegue en línea o descargue pdf Instrucciones para Sistemas de elevación DiscountRamps Silver Spring THR15. DiscountRamps Silver Spring THR15 4 páginas. Aluminum modular self-supporting threshold ramp
(Step 2 Continued) After it's determined where
each piece will go, align the front of the ramp ex-
tension into the back of another extension piece
and slide together until the screw holes match up.
Fig. 2b
Use one tapping screw to secure each ramp
section together. Repeat until all extension pieces
are secured to each other.
Fig. 2c
Step 3. The adjustable top flap is optional during the use
of the ramp. The top flap should NOT be used when it may
interfere with opening and closing a door.
Align the end of the adjustable flap to the end of the highest
ramp extension piece. Slide the flap through until the screw
holes align.
Use one tapping screw to secure the flap to the ramp.
Fig. 3
Installation
Step 1. Once assembled, take the ramp
Fig. 4
to the desired location and put the back
flush against an elevated threshold.
Step 2. For permanent mounting, mark
the surface below where the two holes
are on the adjustable flap (optional) and
the two holes are on the base of the
ramp. Drill holes where marked.
Step 3. Use included flat head bolts for securing the ramp into place through the mounting holes
shown above.
Rev. 011620
Page 3
DiscountRamps.com • 1-888-651-3431