3D AEROWORKS Pilatus PC-21 Manual de montaje y manual de usuario - Página 5
Navegue en línea o descargue pdf Manual de montaje y manual de usuario para Juguete 3D AEROWORKS Pilatus PC-21. 3D AEROWORKS Pilatus PC-21 19 páginas.
Imprimir página
REQUIRED TOOLS:
KNIFE
LIGHTER
SANDPAPER (MEDIUM GRIT)
PLIERS
CA GLUE
SCREW DRIVERS
FILE OR RASP
REQUIRED COMPONENTS:
X1 2804 2300KV MOTOR (or similar)
X1 12AMP or 20AMP ESC
X1 950MAH 2S LIPO OR SIMILAR
X4 3.7G MICRO SERVO
BAMBOO SKEWERS 3MM
HEAT SHRINK TUBE 3mm
X2 10mm X 10mm X 2mm MAGNET (ROUND)
X10 MICRO HINGES (OPTIONAL)
VELCRO
X2 x 200mm CARBON STRIP 3mm x 0.6mm (OPTIONAL)
M2 x10mm SCREWS
1mm PIANO WIRE
M2 PUSH ROD (200mm MINIMUM LENGTH)
** This model comes with the option for fixed style landing gear. The wings and fuselage
sections have alternate parts which accommodate 2mm struts for the main gear and 1mm
wire for the tailwheel. It is advised that the geared option only be used for tarmac or concrete
surfaces. Grass runways should be avoided when using the fixed gear.