ARNOLD 60455 Manual - Página 12

Navegue en línea o descargue pdf Manual para Controlador ARNOLD 60455. ARNOLD 60455 20 páginas. Mirrorball motorcontroller

Mirrorball Motorcontroller

Control Panel

The devices are individually addressed on a data-link and connected to the controller. The devices

respond to the DMX signal from the controller. (When you select the DMX address and save it, the

controller will display the saved DMX address the next time.)

The control panel on the front of the device allows you to assign the DMX fixture address, which is the first

channel from which the device will respond to the controller.

Please note when you use the controller, the device has 2 channels.

When using multiple Mirrorball Controllers make sure you set the DMX addresses right.

Therefore, the DMX address of the first Mirrorball Controller should be 1(001); the DMX address of the

second Mirrorball Controller should be 1+2=3 (003); the DMX address of the third Mirrorball Controller

should be 3+2=5 (005), etc. Please, be sure that you do not have any overlapping channels in order to

control each Mirrorball Controller correctly. If two or more Mirrorball Controllers are addressed similarly,

they will work similarly.

Controlling:

After having addressed all Mirrorball Controllers, you may now start operating these via your lighting

controller.

Note: After switching on, the Mirrorball Controller will automatically detect whether DMX 512 data is

received or not. The problem may be:

●

The XLR cable from the controller is not connected with the input of the Mirrorball Controller.

●

The controller is switched off or defective, the cable or connector is defective, or the signal wires are

swapped in the input connector.

Note: It is necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure

proper transmission on the DMX data link.

Ordercode: 60455

A) OLED display

UP button

C) DOWN button

D) SELECT button

Fig. 05