Discover with Dr. Cool PRO Series Manual - Página 2

Navegue en línea o descargue pdf Manual para Telescopio Discover with Dr. Cool PRO Series. Discover with Dr. Cool PRO Series 8 páginas.

Imprimir página

PRO SERIES TELESCOPE ASSEMBLY INSTRUCTIONS:

Set your telescope components on a clean surface and make sure you have all of

the pieces listed on the other side of this sheet.

Step 1: Using the

hex nuts, washers,

and bolts, attach

the 3 tripod legs

to the tripod base.

Make sure tripod

leg tightening

knobs are facing

inward as shown.

Step 3: Place

the barrel mount

disc on top of the

tripod base and

position the barrel

mount on top of

the disc. Secure

the barrel-mount/

tripod assembly

with the barrel

mount lock.

Step 4: Fit the

barrel rails into

the groove on

the barrel mount.

Attach telescope

barrel with the

eye-piece-end

pointing in the

same direction as

the micro adjuster

mechanism.

Tighten locking

knob.

Step 2: Snap-fit the tripod stabilizer into

place and lightly tighten its three locking

knobs just enough to hold it in place.

Note:

Be sure the

horizontal

and

vertical

micro-adjustment

mechanisms are

both facing in the

same direction.

Note: Be sure to tighten the small locking

knob located on the top of the barrel mount.

Note:

Micro adjustor

mechanism and

barrel eyepiece

both point in the

same direction.