ARO ARO PH10A-BSS-HHT Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Bomba de agua ARO ARO PH10A-BSS-HHT. ARO ARO PH10A-BSS-HHT 9 páginas. 1” high pressure diaphragm pump
Imprimir página
155
125
153
j
152
125
159
j
126
k
. TORQUE REQUIREMENTS ,
NOTE: DO NOT OVERTIGHTEN FASTENERS.
(14) Bolt, 49 - 52 ft lbs (66.4 - 70.5 Nm).
(26) Bolts, 120 - 140 in. lbs (13.6 - 15.8 Nm).
(29) Flange nuts, 280 - 300 in. lbs (31.6 - 33.9 Nm) tighten alternately and evenly.
LUBRICATION / SEALANTS
j Apply Key-Lube grease (93706-1) to all "O" rings, "U" cups and mating parts.
k Apply Loctite 572t to threads at assembly.
l Apply Loctite 271 to threads at assembly.
m Apply anti-sieze compound to threads and bolt and nut flange heads which
contact pump case when using stainless steel fasteners.
ASSEMBLY NOTES
n Assemble with i.d. chamfer against bolt head.
o Assemble with largest convolusion (ripple) towards (6) diaphragm plate.
PH10A-XXX-XXX (en)
PARTS LIST / PH10A-XXX-XXX FLUID SECTION
158
159
j
153
j
164
165
j
163
36
26 ,
m
FOR THE AIR MOTOR SECTION
SEE PAGES 6 & 7
m
2
j
149
154
3
j
5
7
m
3
5
7
2
Torque Sequence
1
124
150
j
148
151
Largest convolusion (ripple) this side.
o
6
3
j
9
n
14 ,
l
15
. 29
32
67
43
1
8
6
4
22
19
j
21
Figure 2
Page 5 of 8