ARO PX10R-XAX series Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Bomba de agua ARO PX10R-XAX series. ARO PX10R-XAX series 8 páginas. 1” diaphragm pump 1:1 ratio (metallic) pd10x-x-x pe10x-x-x
Imprimir páginaNOTE: Assemble (140) valve insert with "dished" side toward
(141) valve plate. Assemble (141) valve plate with part
number identification toward (140) valve insert.
5. Assemble (200) gasket and (233) adapter plate to (135) valve
block. NOTE: Assemble (233) adapter plate with notched
side down.
133
� 134
�
135
138
�
111
139
�
137
�
128
�
136
� 105
�
Models PX10A-X-X
PX10S-X-X
Models PX10R-X-X
107
105
�
135
133
� 134
�
138
�
111
139
�
137
�
136
107
� 236
PD10X-X-X (en)
PARTS LIST / PX10X-X-X AIR SECTION
118
173
�
174
�
121
167
140
141
233
�
200
�
Insert screwdriver here to remove (233) adapter plate.
MAJOR VALVE
Insert screwdriver here to remove (233) adapter plate.
A replacement Major Valve Service Assembly is available separately, which includes the following:
637395-1 for models PD10R-X-X: 105 (4), 107 (2), 111, 132, 135, 136, 137, 138, 139, 140, 141, 166,
176 (2), 200, 233 and 236 (4).
637395-2 formodelsPE10R-X-X: 76, 105 (4), 107 (2), 111, 132, 135, 136, 137, 138, 139, 140, 141, 166,
176 (2), 200, 233 and 236 (4).
637395-3 for models PD10A-X-X: 105 (4), 111, 128, 132, 135, 136, 137, 138, 139, 140, 141, 166, 176
(2), 200 and 233.
637395-4 for models PE10A-X-X: 76, 105 (4), 111, 128, 132, 135, 136, 137, 138, 139, 140, 141, 166,
176 (2), 200 and 233.
637395-5 for models PD10S-X-X: 105 (4), 111, 128, 132, 135, 136, 137, 138, 139, 140, 141, 166, 176
(2), 200 and 233.
637395-6 for models PE10S-X-X: 76, 105 (4), 111, 128, 132, 135, 136, 137, 138, 139, 140, 141, 166,
176 (2), 200 and 233.
Figure 3
6. Assemble (132 and 166) gaskets and (176) check valve to
(101) body.
7. Assemble (135) valve block and components to (101)
body, securing with (134) screws. NOTE: Tighten (134)
screws to 35 - 40 in. lbs (4.0 - 4.5 Nm).
169
168
�
�
172
171
170
166
�
Notch
176
101
132
�
�
TORQUE REQUIREMENTS �
�
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
PX10A-X-X and PX10S-X-X: Torque (105 and 134) screws to 40 - 50 in. lbs (4.5 - 5.6 Nm).
PX10R-X-X: Torque (134) screw and (236) nut to 35 - 40 in. lbs (4.0 - 4.5 Nm).
LUBRICATION / SEALANTS
�
Apply Lubriplate FML-2 grease to "O" rings, "U" Cups & mating parts.
�
Apply PTFE tape tp threads at assembly.
�
Apply anti-seize compound to threads at assembly.
P
PILOT VALVE PART
GROUP
�
�
181
103
173
�
118
121
174
�
201
Page 7 of 8