Acorp 56000BPS Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Módem Acorp 56000BPS. Acorp 56000BPS 13 páginas. High performance v.90/k56flex/v.34+/v.42bis plug & play internal data/fax/modem

X4
Z_
Z0

3.4 Extended AT Commands

&C_
&C0
&C1 Turn on CD when remote carrier is
&D_
&D0
&D1
&D2
&F_
&F
&G_
&G0 Guard tone disabled
&G1
&G2
&P_
&P1
&P3
& V
&V0
&W_
&W0 Stores the active profile as Profile 0
%E_
%E0
%E1 Enable auto-retrain
+MS?
+MS=?
+MS=a,b,c,d,e,f
All responses and dial tone and
busy signal detection
Reset and retrieve active profile 0
Force Carrier Detect Signal High (ON)
present
Modem ignores the DTR signal
Modem returns to Command Mode after
DTR toggle
Modem hangs up, returns to the
Command Mode after DTR toggle
Recall factory default configuration
Guard tone disabled
1800 Hz guard tone
Select 33 ratio M/B at 10pps
Same as &P1 setting but at 20 pulses per
second
Displays Active and Stored Profiles
Disable auto-retrain
Displays the current Select Modulation
settings
Displays a list of supported Select
Modulation options
Select modulation. a,b,c,d,e,f
d e f a u l t = V . 9 0 , 1 , 7 5 , 3 3 6 0 0 ,
75,56000.Parameter¡§a¡¨specifies the
modulation protocol desired where:
B 1 0 3 = B e l l 1 0 3 , B 2 1 2 = B e l l 2 1 2 ,
V21=V.21,V22=V.22,V22B=V.22bis,
V23C=V.23,V32=V.32,V32B=V.32bis,
V34=V.34,K56FLEX=K56FLEX,V.90=V.90.
Parameter¡§b¡¨specifies automode
operations where=automode disabled,
1=automomod enabled.Parameter
¡§c¡¨specifies the minimum connected
speed of
Parameter¡§d¡¨specifies the maximum
connected speed of the transmit
7
the
transmit
direction.