3D innovations DeskCycle2 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Gimnasios 3D innovations DeskCycle2. 3D innovations DeskCycle2 16 páginas.

Adjusting the Bike Height

This version of the DeskCycle comes with an adjustable leg so

that you can set the pedal height to 9 inches or 10 inches.

By default, it's set to 9 inches. Follow the steps below to change

the height of the DeskCycle.

1. Place the bike on a flat hard surface!

2. Remove the nut and washer.

3. Remove the bolt.

4. Set the leg to the desired height and replace

the bolt.

5. Install the nut and washer.

6. Tighten the nut.

Sit-Brake Casters & Dycem Pads

If using the DeskCycle on a smooth floor your chair will

want to roll away from the bike. You can use the Velcro®

tether that came with your DeskCycle to tether the bike

to your chair (see page 8).

An alternative is to replace the casters on your chair with

sit-brake casters. These keep your chair in place when

you are sitting down, and allow the chair to roll when you

are not sitting on your chair. These come with Dycem®

pads which keep the DeskCycle in place on slick floors.

Go to DeskCycle.com for a complete list of accessories.

Raising the Bike Height