ACOUSENCE dac-pre MKII Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Amplificador ACOUSENCE dac-pre MKII. ACOUSENCE dac-pre MKII 17 páginas. Da converter / preamplifier

Imprimir página

Installation

Carefully unpack the unit and please keep the original packaging. The carton is

specially designed for this instrument and provides safe protection during

subsequent transports.

If the unit was exposed to extreme cold (e.g. during transport), wait until the unit has

warmed up to room temperature and the condensation has evaporated completely

before putting it into operation.

Before installing the unit on sensitive surfaces, it may be advisable to check the

compatibility of the surface with the unit feet, e.g. at an invisible location.

Please place the device horizontally on a firm, level surface. The surface on which

audio equipment is placed generally influences the sound quality that should not be

underestimated. The surface should therefore be as heavy and stable as possible.

! At the same time the case serves for cooling

and therefore must not be covered!

The installation may only be done in a well-ventilated, dry place, avoiding direct

sunlight and the proximity of radiators. When installing racks, shelves, or cabinets, it

is important to ensure that sufficient air supply is available. Make sure that the heat

of the device can be discharged. An accumulation of heat affects the service life of

the device and is a source of danger. First and foremost, air circulation should be

maintained through the sides of the perforation. However, the cover and base of the

device also serve to discharge heat. In racks, a distance of 1U to the next device should

ideally be maintained. Smaller distances are possible with good lateral ventilation if

the heating of the device is checked. No heat-insulating objects (e.g. other devices

with a flat base plate without feet) may be placed directly on the housing.

The unit must not be placed near heat-producing, heat-sensitive, or easily

combustible objects or devices. No liquids or foreign bodies may enter the unit

through the unit openings. Protect the device from dripping and splashing water.