disguise 4x4pro Manual de hardware - Página 13

Navegue en línea o descargue pdf Manual de hardware para Servidor disguise 4x4pro. disguise 4x4pro 17 páginas.

Changing VFC cards

Please note: Take steps to ensure you are free of static electricity before starting the procedure and ground yourself

appropriately. We recommend the use of an anti-static wrist strap as well as an anti-static mat if one is available. It is easiest

to change the cards starting on the right hand side, and it is advised to do so regardless of the amount of cards you need to

change.

Users can change VFC cards as they require. You can replace one or multiple cards. The following steps are a guide to help

users change over VFC cards. Please read carefully to ensure best practice. If the system does not work after following these

instructions, do not force the VFC cards but call our Support team as per the contact details on the last page of this document.

Step 1: Disconnect the system from all sources of power: remove the power cord from input and output, before changing the

VFC cards.

Step 2: Using a Phillips #1 screwdriver loosen the 4x retaining screws on the VFC card you want to replace. The screws are

indicated with a red line in the image below.

Red lines indicate screw location. Example shows Quad DVI VFC cards

pro & gx Hardware Guide | Q1 2019

[email protected] | www.disguise.one | 12