Acoustech HT-56 Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces Acoustech HT-56. Acoustech HT-56 4 páginas. Weather-resistant speaker system
Imprimir páginaStep 3
Mount the C-bracket to the wall surface by run-
ning screws through the holes located in the C-
bracket. Stainless
steel screws are
recommended for
outdoor speaker
mounting. Run the
speaker wire through
the appropriate hole in
the C-bracket. (Note:
Mounting screws are
not included with the
Acoustech indoor/out-
door speaker.)
Step 4
Attach the wire from your amplifier to terminals
on the back of speaker. Double-check the
polarity of the speaker wires for both the left
and right channels: amplifier + to speaker +
and amplifier – to speaker –.
Amplifier
Step 5
Install the speaker
onto the C-bracket.
Turn the bracket
knobs into the
cabinet. Point the
speaker toward the
listening area. Upon
determining the
speaker direction,
tighten the bracket
knobs securely.
Step 3
Step 4
Speaker
Step 5
Caring for Your Speakers
Mounting speakers under eaves or other
shelter is highly recommended. DO NOT
immerse speakers in water or subject them to
direct water pressure. During extreme temper-
atures (high or low), we recommend storing
the speakers indoors if you are not using them.
TO CLEAN: Due to its weather-resistant
construction, the Acoustech enclosure can
be cleaned with a damp soft cloth. The metal
grille can also be cleaned with the same cloth,
or, if needed, a small hand vacuum.
Troubleshooting and Service
Acoustech speakers do not use external fuse
protection or circuit breakers because these
devices tend to impede sound quality and may
only protect the speaker to a marginal degree.
Rather, we use components and designs of the
highest caliber as an effective method of pro-
tecting the speaker. However, no amount of pro-
tection will prevent damage caused by defective
associated equipment or extreme abuse.
If you have a problem, first try to determine
if it is indeed a speaker problem. Determine
whether the problem exists in both speakers. If
its does, the problem likely originates in some
other component in the system. If the problem
is in one speaker only, reverse your speaker
leads (left to right, right to left). If the problem
moves to the other channel, your problem is
not in the speakers.
Once you have determined that you have a
speaker problem, contact your dealer for author-
ized factory service information. If you are
unable to contact your dealer, if your dealer is
unable to solve your problem, or if you have any
questions or comments regarding your
Acoustech Speaker System, please contact us at:
B . I . C America
42 Alpha Drive
Cleveland, OH 44143
www.bicamerica.com
For tech support call 1-888-242-4551
Please describe the problem in detail. We will
decide on the most appropriate course of action.