CubuSynth Dual CS-20 VCF Manual de construcción - Página 9
Navegue en línea o descargue pdf Manual de construcción para Equipo de música CubuSynth Dual CS-20 VCF. CubuSynth Dual CS-20 VCF 16 páginas. Dual / stereo multimode vcf with self-oscillating resonance and intuitive routing and cv modulation matrix
También para CubuSynth Dual CS-20 VCF: Manual (9 páginas)
Imprimir páginaCubuSynth Dual CS-20 VCF - Build Guide
STEP 11 (Main PCB)
Power header
1
EURORACK10
Turn around the board and place the Pin Header for Power like shown.
Orientation of the Power Header is very important to be able to insert the power cable the
correct way.
Put some tape, to hold it in place while soldering from the other side or push it against the PCB
with your fingers while soldering the first Pin. Be careful to not touch the one Pin you are
soldering, it gets very hot!
STEP 12 (Main PCB)
10uf Electrolytic capacitors
2
10u
Place the two 10uf capacitors on the bottom of the
PCB, with the white/grey line on the capacitor
facing towards the white mark on the PCB. The
longer leg of the capacitor goes through the hole
marked with "+"
Page 9
SV1
C10,C9
PCB V1.4 Mar 2023