Dish Network DISH 500H Manual

Navegue en línea o descargue pdf Manual para Antena Dish Network DISH 500H. Dish Network DISH 500H 20 páginas.
También para Dish Network DISH 500H: Manual (18 páginas)

Imprimir página

Introduction to Installation Diagrams

•

The installation options listed on the following pages may or may not be reimbursable installations. Refer to the latest

Business Rules to confirm reimbursement status.

•

Installations must use all Legacy LNBFs and switches, or all DISH Pro/DISH Pro Plus LNBFs and switches. Do not mix

and match Legacy components with DISH Pro/DISH Pro Plus components.

•

If upgrading from Legacy LNBFs and switches to DISH Pro/DISH Pro Plus LNBFs and switches, ensure all Legacy

components (for example, power inserters) are removed. Remove DP Adapters from any Legacy receivers connected

to DISH Pro Plus components.

•

Maximum distance between the furthest LNBF and farthest receiver is 200 feet for DP/DP Plus receivers; 100 feet for

Legacy receivers (four-digit model numbers). Maximum cable length from a wing dish with a compatible DISH Pro

LNBF to a DISH Pro Plus LNBF's LNB I

•

Ensure all components (for example, cable, ground blocks, diplexers, splitters, line amps, barrel connectors, wall plates

and surge protectors) are rated for DISH Pro/DISH Pro Plus installations (rated to 2150 MHz and pass DiSEqC 22 KHz

tone—review the DISH Network Approved Accessories List), also referred to as DP compatible.

•

Refer to the LNBFs and Switches and Dish Antennas sections for Legacy receiver installation considerations.

Abbreviations

•

DP: DISH Pro

•

DPP or DP Plus: DISH Pro Plus

Installation Diagrams - Introduction to Installation Diagrams

port is 80 feet with 120 feet from DPP LNBF to receiver for a total of 200 feet.

3 - 1