3D Systems CubeX Trio Sustitución de la punta de impresión - Página 6

Navegue en línea o descargue pdf Sustitución de la punta de impresión para Impresoras 3D 3D Systems CubeX Trio. 3D Systems CubeX Trio 7 páginas.

Imprimir página
8
With the print tips levelled you can now turn on the CubeX printer and set the print tip offsets.
SETTING PRINT TIP OFFSETS
See the
CubeX user guide
Download the CubeX Duo calibration file
Download the CubeX Trio calibration file
FASTENING THE PRINT TIP ON A CUBEX
!
A CubeX with a single print jet does not have a second or third nozzle to reference the print tip level.
Instead you have to use the CubeX wiping stick.
1
Power on the CubeX printer.
2
Put the CubeX into manual move.
3
Raise the print pad until it is approximately 5mm away from the print tip.
4
for instructions on how to set your print tip offsets.