Dispense-Rite SLR-LID-2 Series Instrucciones de instalación

Navegue en línea o descargue pdf Instrucciones de instalación para Dispensador Dispense-Rite SLR-LID-2 Series. Dispense-Rite SLR-LID-2 Series 2 páginas.

Imprimir página

DISPENSE-RITE

INSTALLATION & OPERATION INSTRUCTIONS

The lid dispenser is shipped completely assembled but it will require in-counter installation prior to initial usage.

Important note: This product is not intended for use with all lid types and compatibility is not guaranteed with all lids.

Prior to fabricating any holes in your counter please verify that your specific lids are compatible with this product.

Lids that are tightly nested or have deep extrusions may not be easily removed and should not be used with this product.

The recommended installation for this lid dispenser will provide lid dispensing in an upward direction. For certain lid types

and special mounting applications a downward dispensing may be preferred. For this option please be sure the mounting

head has been installed with the "UP" arrow pointed to the bottom instead of the top.

SECTION ONE - LID DISPENSER INSTALLATION

Cut a 5-1/4" diameter hole into the mounting surface.

Insert the lid dispenser into the mounting hole. Push lid

dispenser all the way in until it is flush with the counter.

Align the "UP" mark to the top for an upward lid

dispensing application (recommended).

Align the "UP" mark to the bottom for a downward

lid dispensing application (optional).

5-1/4"

134 mm

Diversified Metal Products, Inc.

2205 Carlson Drive • Northbrook, IL 60062 • (847) 753-9595 • fax (847) 753-9648

www.dispense-rite.com • [email protected]

SLR-LID-2 SERIES

Drill four 9/64" pilot holes in the locations shown below.

Fasten the dispenser with the four #10 screws provided.

Place lid dispenser cover ring on the mounting head

and rotate clockwise to secure.

Discharge opening should be facing the top for

upward lid dispensing applications (recommended).

Discharge opening should be facing the bottom for

downward lid dispensing applications (optional).