ARRAID AEM-8 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Almacenamiento ARRAID AEM-8. ARRAID AEM-8 13 páginas.

AEM-8 User Guide

HP-IB Disk Drive Replacement System

Technical Note: The original AEM-8 had internal SCSI peripherals. Internal SCSI

peripherals were discontinued by Arraid in 2019. The current AEM-8 uses only solid-state

internal peripherals. This updated manual deals only with solid-state AEM-8 devices.

AEM-8 Overview

The Arraid AEM-8 is a direct replacement for Hewlett Packard disk storage systems that adhere to

the HP-IB interface standard (IEEE-488) and utilize the CS/80 command set. The AEM-8 emulates

the following HP-IB devices:

C2200, C2202, C2203, 7906, 7907, 7908, 7911, 7912, 7914, 7920, 7925, 7933, 7935, 7936, 7937,

7941, 7942, 7945, 7946, 7957, 7958, 7959, 7961, 7962, 7963, 9144,

9145

The HP-IB devices listed in

RED

are directly selectable from the AEM-8 control panel. The HP-IB

devices in BLACK have been reported to work by our client base. These are included for

information purposes only. Arraid cannot independently verify these reports.

The Arraid AEM-8 is also a direct replacement for Bering Technology storage systems that emulate

the HP-IB interface standard (IEEE-488), and the CS/80 command set. The Arraid AEM-8 can

replace the following Bering devices:

OptiPac, EconoPac, 6012458-008, 8032AF, 6012458-005, 8631AF, 6012458-002, 8602, 8502, and

many others.

The Arraid AEM-8 can replace most every type of Bering storage device ever manufactured.

(NOTE: Bering Technology has now ceased manufacturing and repair operations.)

The AEM-8 is a plug & play replacement for any HP or Bering drive model listed above. Each

AEM-8 has an internal Single Board Computer (SBC) that emulates the electronic and physical

characteristics of the original HP devices. The SBC acts as a bridge, converting HP-IB protocol into

industry standard SCSI protocol, which is again converted to run current technology solid-state

devices. The media used in current model AEM-8 devices is industrial quality Single Layer Cell

(SLC) Compact Flash (CF) cards.

The basic AEM-8 configuration consists of a 19" rack-mount chassis with a front control panel, one

or two internal peripherals, a PSU, and the SBC. The internal peripherals can be programmed to

behave as one or two disk drives, or as one disk drive & one MO/Tape drive (for backup), or as a

single MO/Tape drive.

Some models of the AEM-8 offer features not available with the original drives. These features

include offline backup & restore, multi-volume support (multiple disk images on a single CF card),

and removable CF media.

AEM-8 User Manual

Revision E (11/01/22)