Aerial Aerocube VT2 Series Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Deshumidificador Aerial Aerocube VT2 Series. Aerial Aerocube VT2 Series 20 páginas. Water separator
4
Transport and installation
Transport
1.
Remove the packaging material completely and dispose of according to the local
regulations.
2.
Check the delivery for completeness.
3.
Use the lateral handles or the handle in the middle of the cover to transport the
water separator to the place of installation.
Scope of delivery
Water separator VT2, accessories (see chapter 10, page 14)
One instruction manual
Operating conditions
The water separator VT2 is designated for vacuum drying and screed insulation layer
drying in the vacuum mode. It works without problems in the temperature range from
0 °C to 35 °C.
Fig. 4: Fixing points for belt system
Connection
Danger to life due to electric shock
Prior to commissioning the technical data of the water
DANGER
separator VT2 must be compared with the conditions prevailing
in the room of installation!
The following items must be checked prior to electrical connection of the water
separator:
Is the mains voltage in conformity with the voltage of the device?
Are socket and supply system sufficiently fused?
RCCB required!
Connect the power plug of the water separator to a suitable power outlet.
TRANSPORT AND INSTALLATION
Installation
The devices can be stacked, and are
provided with fixing points for a belt
system on the right and left.
Page 7 of 15