Acoustic Arc AH0810US Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Auriculares Acoustic Arc AH0810US. Acoustic Arc AH0810US 10 páginas. 913mhz headphone system

TECHNICAL SPECIFICATIONS

Transmission mode

Carrier frequency

Operating voltage

Frequency response

Distortion

Signal-to-noise ratio

Channel separation

Range

NO SOUND

-Ensure that the mains adapter is pushed fully into the power outlet and

that its cable is properly connected to the DC IN 6V connector on the

transmitter.

-Ensure that the headphones On/Off switch is switched to the On

-The headphones battery charge level may be too low. Recharge the

batteries or replace them with fully charged batteries.

-Ensure that your TV set, Hi-Fi system or audio component is switched on

and set to a channel that broadcasts an audio signal.

-Use the headphone volume control to increase the sound level (only

when use as a wireless headphone). When use as a corded headphone,

the headphone volume can be adjusted at the sound source eg. Hi-Fi, or

TV, etc.

-The connected audio/video equipment may not be in playback mode.

Start playback on by the equipment.

-The headphone output level is set too low. Adjust the volume to a suitable

level.

: UHF stereo

: 900MHz

: Transmitter – 6 V 300 mA

Receiver – 2.4 V (2 X rechargeable

batteries, LR03/AAA size)

: 40 Hz – 11 KHz

: 1 %

: 65 dB

: 30 dB

: 50 meters (open area)