Acoustic Arc DH1080 Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Auriculares Acoustic Arc DH1080. Acoustic Arc DH1080 8 páginas. 2.4ghz digital wireless/wired headphone with noise cancelling
Imprimir página7. TROUBLE SHOOTING
NO SOUND
•
Ensure that the dongle is On and connect properly with your
audio source
•
Ensure that the headphone is on.
•
The headphone/dongle battery charge level may be too low.
Recharge the battery pack again.
Ensure that your DVD, TV set, Hi-Fi system or audio
•
component is switched on and set to a channel that broadcasts
an audio signal.
•
Use the headphones volume control to increase the sound level
(only when use as a wireless headphone).
•
The audio signal input level is too low. Increase the volume
from the audio source of Hi-Fi, CD, or TV, etc.
•
The connected audio/video equipment may not be in playback
mode. Start playback on by the equipment.
•
The headphone output level is set too low. Adjust the volume to
a suitable level.
DISTORTION
•
Restart the Pairing process. Pressing the Power button for 12
seconds In the dongle shutdown state. After that, pressing the
headphone pair until the blue LEDs flash. The LEDs will change
to solid blue when pairing process is finished.
•
The headphone/dongle battery pack charge level may be too
low. Recharge the battery pack.
•
Ensure that the volume knob setting is correct.
•
The headphones may be too far away from the transmitter.
Move closer to it.
•
The audio signal input level is too low. Increase the volume from
the audio source of Hi-Fi, CD, or TV, etc.
8