3D Systems ProJet 5000 Manual - Página 13

Navegue en línea o descargue pdf Manual para Impresoras 3D 3D Systems ProJet 5000. 3D Systems ProJet 5000 14 páginas.

Returning the Advance Preparation Checklist?

Return the completed checklist via the method chosen below:

Fax to the Account Representative's fax number (above):

Fax to the _________________________________________

office fax number (see above)

Fax or mail to: _____________________________________

ACCOUNT REPRESENTATIVES Place Business Card here and

staple to document.

STAPLE CARD HERE

12.0 Printer Advance Preparation Checklist

NOTE: Unless governed by prior arrangement, 3D Systems is not responsible for loading the Projet™ client software on

the user's workstation(s). Thus, BEFORE THE PRINTER ARRIVES, ensure that your workstation is capable of supporting

the requirements of both the client software and communication with the machine via your network.

Review this list with a network administrator, IT department, facilities manager or other responsible person within your organization. Complete and

place a check mark next to each item. Once everything is complete, photocopy this page, and fax it to the number checked or provided on the

bottom of the inside back cover of this document. If no number is provided or relevant, then fax to +1 970-257-4601 (U.S.A).

Please complete the following (if making a copy to fill in, please print):

Company Name: _____________________________________________________________

Contact (Print full name): ______________________________________________________

Date faxed: _________________________________________________________________

Telephone (with area code): ____________________________________________________

Email: _____________________________________________________________________

Please place a check in each box once that item is complete.

Final installation site selected. The intended physical location for each ProJet™ Production Printing System(s) should be selected in

advance, and checked for adherence to the guidelines set out in this guide.

If required by the shipper, a method of removing the crate from the shipper's truck has been arranged (forklift is required) and is

available to transfer the crate(s) to the decrating location.

NETWORK CONNECTION IS INSTALLED. An RJ45 (UTP, female connection jack) Ethernet network connection for EACH printer

that is to be installed at the delivery site must be installed, tested and functioning.

Operating system and workstation configurations are compatible and meet the minimum requirements as stated in the "Client

Workstation Requirements" section.

TCP/IP is installed and enabled.

Static IP address(es) has/have been allocated for each printer ordered. A permanent IP address on the network is assigned

(presumably by a Network Administrator) to each printer that is to be connected to the network. Write IP address here:

____________________________

Test each IP address by pinging it, or by temporarily connecting a network resource (such as a workstation or a Printer) and "pinging"

from another workstation on the network.

Dedicated line, with a surge-and-spike-protected electrical power circuit for each printer, meeting one of the following specifications

(Place check mark beside the appropriate specification:

____ 115 VAC, 50/60 Hz (dedicated 20 amp breaker)

____ 230 VAC 50/60 Hz (dedicated 15 amp breaker)

Provide uninterruptible power (active battery back-up)

Check

Box