Acoustic Control GAMMA ATLAS Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Pedal de música Acoustic Control GAMMA ATLAS. Acoustic Control GAMMA ATLAS 2 páginas. Boosted overdrive

Imprimir página

DC 9V Power Input Jack

You can power your GAMMA Series

pedal from a 9-volt regulated DC

adapter (plug polarity is positive on

the barrel and negative in the center).

2. Battery Capability

Use a Phillips head screwdriver to

remove 4 bottom screws to access

battery connection. High quality

alkaline 9-volt battery can be used for

approximately 50 hours of continual

operation. If pedal won't operate when

battery is installed, battery may be

discharged, and should be replaced

with a fresh, fully-charged battery. Or

connect a compatible power supply

for non-battery operation.

3. Footswitch

Push down the footswitch to toggle

between on and bypass status.

4. LED

When the LED is lit, the effect is on.

When it's off, the effect is bypassed.

(Bottom removed for battery access)

5. INPUT Jack

¼" mono audio jack, to receive the

signal from your guitar or a previous

pedal. Pedal draws power only when

this jack has a plug inserted.

6. OUTPUT Jack

¼" mono audio jack, outputs the signal.

BOOST SWITCH

Boost setting adds low frequency energy,

and adds more high end bite to the

DRIVE.

8. LEVEL Knob

Adjusts output level (volume).

9. DRIVE Knob

Adjusts the amount of distortion.

10. TONE Knob

Adjusts the high frequency response,

from dark to bright. Try the center

(noon) position as a starting point.

AcousticControlCorp.com

Underside of pedal

21510408 2209