Abbra Home Control Manual de inicio rápido - Página 5

Navegue en línea o descargue pdf Manual de inicio rápido para Control Panel Abbra Home Control. Abbra Home Control 8 páginas. For abbra home control; abbra campus; abbralink
También para Abbra Home Control: Manual de inicio rápido (20 páginas)

Imprimir página

•

Go to

www.myabbra.com

and select

the Latchkey Notification link.

•

Enable this feature so you will be

notified when the children arrive

home. Select the people and

methods you would like to Abbra to

notify.

•

Now select the Automation link

•

Assign each of the Automate fields

the appropriate House Code and

Unit Code to match the House Code

Using Your Abbra

QUICK REFERENCE TO ARMING AND DISARMING

Arming AWAY...................

Arming AWAY-INSTANT......

Arming HOME ..................

Arming HOME-INSTANT ....

Force Arming AWAY (bypass open zones)....

Force Arming HOME (bypass open zones)....

Disarming and stopping alarms.................

The factory default master user code is 1 1 1 1.

•

You can also use your keychain remote control transmitter remote control to arm and

disarm the system.

•

Pressing the Lock button will arm the system in Away mode.

•

Pressing the Home button will arm the system in Home mode.

•

Pressing the Unlock button followed by your code will disarm the system.

•

Pressing the * button will cause the Abbra to announce whether or not it

can currently be armed.

and Unit Code you have selected on

the XPR

•

Select Schedule as the trigger for

this scenario and enter the times

the outlet will be powered down and

when power will be resumed. For

this scenario we would select 3:30

PM for the Off time and 5:00 PM as

the On time. Now check the days

this rule will apply, each of the days

from Monday through Friday.

+ [Code]*

+ [Code]* +

+ [Code]*

+ [Code]* +

+ [Code]

Step 3 – Installing the

Wireless Sensors

There are two types of sensors provided,

the Magnetic Contact for doors or

windows and the Movement Sensor

which are wall mounted, either on a flat

surface or in corners.

Installing the Magnetic Contact

Activate the battery by removing the

transmitter cover, using a screwdriver.

Remove the red tag from the battery and

check that the LED flashes.

Replace the cover and tighten the screw.

Install the Magnetic Contact on a door

or window. Attach the transmitter to the

frame and the magnet to the door or

window, ensuring that the ^ marking

faces the magnet, and the two parts are

no more than 1/4 inch (0.25'') apart when

closed.

The

Magnetic

Contact

pre-

programmed as FRONT DOOR and it

has an ENTRY DELAY. This means you

will have 45 seconds to switch the

system off before the siren sounds. You

can change both these settings later if

you desire, particularly if you wish to use

on a window.

Quick and easy press and stick

mount: You can install the Magnetic

Contact by fixing with adhesive tape to

the back of the contact and the magnet

and pressing into place or by screwing to

the mounting surface. Note that the

adhesive tape is very strong. The bond

will strengthen over time and set

completely after 72 hours. To attach with

screws, you must open the Magnetic

Contact and gently lever out the

circuit board. Use the casing to mark the

drill holes. Insert wall plugs and screw

case to wall.

Replace circuit board and transmitter

cover. If you have an uneven surface

which prevents the transmitter and the

magnet from aligning correctly e.g. PVC

doors or windows, you may wish to use

the spacers provided. Please refer to the

main User Guide for more information.

Installing the Motion Sensor

Activate the battery by removing the

front cover of the sensor, using a

screwdriver. Remove the red tag from the

battery and check that the LED flashes.

Replace the cover and tighten the screw.

Install each Motion Sensor on a solid

interior surface only, between a height of

1.8m (6') and 2.4m (8'). Do not point at

sources of heat, expose to drafts, or

place in direct sunlight.

The Motion Sensor is pre-programmed

as LIVING ROOM and has the HOME &

AWAY response type. This means that

as soon as any activity is sensed when