3D Systems Touch Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Accesorios 3D Systems Touch. 3D Systems Touch 19 páginas. 3d stylus hands on design
También para 3D Systems Touch: Manual del usuario (17 páginas)

Imprimir página

USING THE TOUCH DEVICE

This section introduces you to working with the Touch device and the physical limits of the device's range of motion. It is important to

understand these physical limitations so that you do not inadvertently damage the device by forcing it past its designed limits.

WORKING IN 3D SPACE

We have become so accustomed to using a mouse to move around a computer screen that we don't think twice as we move our hand

around a desk to move the cursor. But there was a time not long ago when this simple task was not second nature; some even found

it challenging and were often frustrated as they learned. If you are new to working with a haptic and in a 3D digital space, it may take

some time to feel comfortable. Understanding where objects are in 3D space may take some practice before you are able to move and

manipulate objects with ease and certainty. Be patient with yourself.

PHYSICAL LIMITS OF THE DEVICE

The Touch device has physical limits. When you reach one of these limits you will feel a sudden stop; this is the mechanical stop

designed into the device. Forcing the Touch past any of these stops will damage the device.

Take some time to become more familiar with the stops of the Touch before using the device by moving the device through its full range

of motion.

MOVING WITH THE STYLUS

Using the steps below and the accompanying images, try moving the stylus through the different range of motions.

Hold the

stylus

as you would a pencil or pen, with the free end (the end not connected to the device) of the stylus (the eraser end

of a pencil) pointing towards you.

Gently move the stylus to the left and then to the right.

Move the stylus to the right.

3D Systems, Inc.

Move the stylus to the left.