3D Systems Touch Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Equipamiento médico 3D Systems Touch. 3D Systems Touch 17 páginas. 3d stylus hands on design
También para 3D Systems Touch: Manual del usuario (19 páginas)

Imprimir página
3D Systems Touch Manual del usuario
8

REGISTER AND ACTIVATION

7

REGISTER YOUR TOUCH DEVICE

You need to create an account and then log in to Cubify.com to activate the Touch 3D stylus.
1.
Go to www.Cubify.com/Touch.
My
Cubify, and then click Sign up.
2.
Click
3.
Fill out the required information and click
The Activate your Touch 3D stylus window appears.
4.
Enter the
serial number
You will receive an activation code that you need to enter into your software to activate and start using.
Depending on which 3D software you purchased, follow the appropriate instructions below to register and activate your 3D software.

REGISTER, ACTIVATE AND START USING CUBIFY SCULPT

If you are using 3D's Cubify Sculpt application to create your designs with the Touch device, you must register and activate the software
for the Touch device to recognize the software.
1.
Download
and
install
You will receive a prompt to register the 3D software.
2.
Register
the Cubify Sculpt software through the Cubify website:
3.
Enter the
activation code
You're now ready to begin using the Touch device and the 3D software.
When Cubify Sculpt launches, the Touch automatically recognizes the application. The Touch LED ring should display White.
NOTE: For instructions on correctly connecting the Touch, see
4.
From Cubify Sculpt, select a shape in the
5.
Use the Touch and the options in Cubify Sculpt to create and draw your design.
NOTE: See the Workflow window (tutorial) that's included with the Cubify Sculpt application for information on how to use
the software and create a design.

REGISTER, ACTIVATE AND START USING GEOMAGIC SCULPT

If you are using 3D's Geomagic Sculpt application to create your designs with the Touch device, you must register and activate the
software for the Touch device to recognize the software.
1.
Download
and
install
Start
2.
the application.
The License Utility window opens. The License Utility allows you to license and use your product. When you launch the License
Utility, click the Help button to read the Licensing Guide.
3.
Follow the instructions to activate your product in the License Utility.
You're now ready to begin using the Touch device and the 3D software.
When Geomagic Sculpt launches, the Touch automatically recognizes the application. The Touch LED ring should display White.
NOTE: For instructions on correctly connecting the Touch, see
4.
From Geomagic Sculpt, select
5.
Use the Touch and the options in Geomagic Sculpt to create and draw your design.
NOTE: See the Geomagic Sculpt Training Guide (tutorial) for information on how to use the software and create a design.
3D Systems, Inc.
Sign
Up.
of your Touch 3D stylus, then click Activate.
the Cubify Sculpt application.
(you received after registering your Touch device) in the Cubify Sculpt installer window.
New Model
the Geomagic Sculpt application.
File >
New, and then select a shape in the
www.Cubify.com/Sculpt
"Connect the Touch" on page
dialog, then click OK.
"Connect the Touch" on page
New Model
15
6.
6.
dialog, then click OK.