Acoustic Energy AEG05/P5 Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Altavoces Acoustic Energy AEG05/P5. Acoustic Energy AEG05/P5 16 páginas. Powered 5.1 surround sound speaker system
Imprimir página
AEGOp5 Operation
- Delay Calibration
Subwoofer
Front
Left
Rear Left
The recommended listening position is described below:
Centre channel speaker should be placed the same distance as the
left and right speakers from your listening position.
Rear left and right speakers should be placed behind your listening
position and above ear level.
If speaker placement is restricted due to the physical environment
of the room, delay calibration is sometimes necessary to achieve
the ideal listening environment.
If the centre speaker can only be placed nearer to you than the left
and right speakers, sound from the centre speaker will arrive
before the sound from the left and right speakers. The difference in
arrival time could may affect the sound quality and effect. Your
AEGO
5 allows you to adjust the speaker time delay to compensate
P
for this problem by increasing the delay time for the centre channel.
Thus sound from the centre, left and right speakers will reach you
at the same time. If your centre speaker is closer to your listening
position than the left and right speakers, press DELAY button
repeatedly until the centre channel is selected. To increase or
decrease the delay time, press D TIME + or D TIME - until the
desired delay is selected. The same procedure can be applied to
adjust the delay time of rear surround speakers if necessary.
AEGOp5 Operation - Time Delay
Adjustment on Centre Channel
Speaker
Delay Calibration
Press the DELAY button and repeat to
select the length of delay time for the
Rear Left (SL), Rear Right (SR) and
Centre(C) channels.
The delay range for SL/SR is 0 to 15
ms and 0 to 5 ms for centre.
Adjust the delay time for the selected
channel by pressing D TIME + or D
TIME - on the remote control.
AEGOp5 Operation
Centre
Front
Right
Rear Right
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
reset
Press the DELAY Button will display the current
delay time for channel LS.
DOLBY DIGITAL CO
DELAY
SL 5 MS
Press the DELAY Button again will circle to next channel.
DOLBY DIGITAL CO
DELAY
SR 5 MS
Press the D TIME + or D TIME - button will increase or
decrease the delay time for current channel.
DOLBY DIGITAL CO
DELAY
SR 6 MS
AEGOp5 Operation - Time Delay
Adjustment on Surround
Speakers
Delay Calibration
Press DELAY Button and repeat to
select the length of delay time for
SL/SR/C channels.
The delay range for SL/SR is 0 to 15 ms
and 0 to 5 ms for centre.
Adjust the delay time on selected
channel by pressing D TIME + or
D TIME - on the remote control.
Surround Speaker Delay
Delay calibration for the rear surround
speakers may be necessary if the surround speakers are placed quite
close to your listening position. To correct the delay this may cause,
press the DELAY button repeatedly until SL or SR appear on the
display. Increase the time delay of the surround speakers by pressing
D TIME + until you are able to hear a 3D sound effect coming from
surround speakers.
Press DELAY Button again to move to the next channel.
DOLBY DIGITAL CO
DELAY
SL 5 MS
DOLBY DIGITAL CO
DELAY
SR 5 MS
Press D TIME + or D TIME - to increase or decrease
the delay time for the selected channel.
DOLBY DIGITAL CO
DELAY
SR 6 MS
12
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
reset