CamCuddle Smart Life S8 Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Cámara digital CamCuddle Smart Life S8. CamCuddle Smart Life S8 12 páginas.
Imprimir página
Step 3: Setup Camera Connection Mode
This camera supports two independent connection modes.
▪ IP connection mode: The camera connects to your internet network and you can view the camera's live
video from anywhere and anytime on your mobile device as long as you have internet access. In this mode,
the camera indicator light is Red.
▪ AP connection mode: Your mobile device connects to the camera's Wi-Fi network and you can only view
the camera's live video from a short distance (maximum 30 ft). This mode is perfect for outdoor activities
or when there is no internet connection. In this mode, the camera indicator light is Blue.
Please choose a Connection Mode that works best for you and follow the setup instruction right below.
➢ Setup IP Connection Mode
On your mobile device, go to Settings and select Wi-Fi. Tap on iCooky_***** from the available networks to
connect your device to the camera's network (P2.1)
P2.1– Choose iCooky_******
P2.2 – Select Wi-Fi Options
Next, open the iCookyCam app on your mobile device. Wait for about 3 seconds and the app will automatically
connect to the camera.
At the prompt message "Do you want to connect the device to the router?", select Connect (P2.4).
In the Wi-Fi Setting window, select your Wi-Fi network name, enter the correct Wi-Fi password, then select
Connect (P2.5).
The app starts to setup the connection between your mobile device and the camera (P2.6). Please wait for
about 90 seconds for the IP Connection Mode setup to complete. After finish, the Red indicator on the back of
the camera flashes slowly.
To start viewing the camera, tap on the camera area (P2.7).
In this IP connection mode, you can view the camera from anywhere as long as your device has WI-FI access.
Notice:
▪ If you enter a wrong Wi-Fi password in step P2.5, the setup will fail and the camera will return back to its
default working state (Blue indicator light flashes slowly). Your mobile device now connects back to your
Wi-Fi network. You would need to start the setup again.
Notice:
▪
Try to be close to the camera while setting up the
connection
▪
On an Android device, after connect your device to the
camera's network, you may see a popup window as
below (P2.2). If you see it, tap on it, select the option
"Don't ask again for this network" then select Yes (P2.3).
This step is important!
P2.3 – Confirm Network Access