Acoustic Image Clarus Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Amplificador Acoustic Image Clarus. Acoustic Image Clarus 10 páginas. S4plus
También para Acoustic Image Clarus: Manual del usuario (12 páginas)
Imprimir página
Specifications
System (all models)
Frequency Response
30 Hz-18 kHz (40-14 kHz ±3 dB)
50 Hz-
18
Max SPL
>112 dB at 1 meter,
(Corus), >118 dB/m (Ten2)
AC Power
100-115V/50/60 Hz or 220-240V/50 Hz,
switchable,
Size
12"Hx15"Wx13"D (Coda, Corus, EX)
17"Hx15"Wx13"D (Ten2), 14"H (EX)
10"x8"x3.5" (Clarus)
Weight
22 lbs (Coda, Corus, 19 lbs (EX)
32 lbs (Ten2), 25 lbs (EX)
4 lbs (Clarus)
Amp Head
Frequency Response
20 Hz - 20 kHz (
Preamp (Mic and Instrument Inputs through combo jack)
Mic Input
600 ohm balanced, XLR connector,
switchable 10 dB pad
Phantom Power
48 volts, on/off switch w/LED indicator
W
Instrument Input
1 M impedance, 1/4 inch jack
Direct Out
+4 dB, balanced, XLR connector, ground
lift, pre/post EQ selector
Effects Loop
Parallel type with return level control
Bass Control
Shelving type, ±15 dB at 60 Hz
Mid Control
±15 dB at 650 Hz
Treble Control
Shelving type, ±15 dB at 10 kHz
Low Cut Filter
-12 dB/octave sweepable from 30 to 400
Hz
Phase Reverse
Switchable 180 degree phase reverse
Effects
Type
Digital with 6 presets and level control
Program Presets
3 reverb (hall, room, plate), delay,
ambient chorus, flange
Power Amp
Topology
Class D (PWM)
Switching Frequency
500 kHz
W
Output Power 8
300W rms continuous, 350W rms music,
500W peak transient
W
Output Power 4
500W rms continuous, 650W rms music,
1000W peak transient
External Speaker Output
Neutrik Speakon type (pole 1), 2 min
load including internal speakers, if
connected
14
kHz (60-1 kHz
4
±3 dB
) Corus
>115 dB at 1 meter
±0.5 dB)
W
Speaker System (Coda, Corus)
Woofer
10 inch, downfiring
Midrange
5 inch, forward firing with 2 position level
control switch
Crossover
Passive, alignment corrected
W
Impedance
8
Power rating
250W
Speaker System (Ten2)
Woofer
Dual 10 inch, one downfiring with level
control, one forward firing
Tweeter
2.5 inch forward firing with attenuation
control
Crossover
Passive, alignment corrected
W
Impedance
4
Power rating
500W
Supplied Accessories
Fitted slip cover with cord storage
pocket and shoulder strap (combo
amps)
Gig bag with shoulder strap, Speakon
to 1/4 inch adapter (amp heads)
Available Accessories
Padded gig bag with shoulder strap
made by Mooradian, kit to convert
cabinet with head removed to an
extension cab (adapter, filler panel,
padded case for head)
Shoulder Strap
To use the shoulder strap to transport a combo amp, feed the strap
through the handle opening on the speaker cabinet (both sides) and
clip the end to the D-ring attached to the strap. The picture below
illustrates how to attach the strap. The strap can be used either with
the slip cover in place or not in place.
15