3DGence DOUBLE P255 Manual de mantenimiento - Página 15

Navegue en línea o descargue pdf Manual de mantenimiento para Impresoras 3D 3DGence DOUBLE P255. 3DGence DOUBLE P255 19 páginas.

Fig.70 Measurement toothed belt on the Y axis

•

Make the timing belt vibrate by vigorously jerking it like a guitar string.

•

Check the voltage value on the tester and read the frequency value.

For a correctly tensioned Timing Belt on the Y axis, the measured value should be between 71-75 Hz.

If the measured tension value for tension belts is not within the specified ranges, please contact the 3DGence

Technical Support for assistance.

3DGence DOUBLE P255 - maintenance activities | version 07.2021