CAME v6000 Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Abrepuertas de garaje CAME v6000. CAME v6000 17 páginas. For garage doors

Imprimir página

1. Adjusting Sensitivity

Install the support brackets

and the U-bracket

Adapt the pierced plates, bending them, in order to compensate for the distance of the rail from the ceiling.

Secure the plates to the support brackets and the U-bracket using the screws and nuts supplied. Drill the ceiling at the point of the plate ﬁ xing holes.

Secure the plates to the ceiling using suitable screws and anchors.

Securing the transmission arm to the door

Secure the door mounting bracket to the upper door crosspiece, perpendicularly to the rail. Use the screws supplied or other suitable screws.

Secure the transmission arm

to the door mounting bracket using the insert and split pin supplied

If assembling the curved lever

, secure it to the transmission arm using the screws and nuts supplied.

Securing the operator to the rail

Fit the adapter onto the motor shaft.

The operator can be ﬁ xed to the rail: in a standard position

U-bracket

Microswitch

Moving the micro

Disconnect the microswitch cables and remove it.

on the rail.

or orthogonally

Self-tapping screw

6x15

Rail

Shaft with adapter

lation (see the section: Moving the micro).

Self-tapping screw 6x15

Microswitch

Shaft with adapter

If mounting the operator in an orthogonal position, move the micro before instal-

Rail

U-bracket