Aerisa AerBrush 01 Manual de instalación, uso y mantenimiento - Página 3

Navegue en línea o descargue pdf Manual de instalación, uso y mantenimiento para Limpiador de aire Aerisa AerBrush 01. Aerisa AerBrush 01 4 páginas.

ELECTRICAL INSTALLATION INSTRUCTIONS

Warning: Do not connect to power before installation is complete. Always disconnect power to the unit

before handling the ionizer.

1. All field wiring to be in accordance with NEC and Authorities Having Jurisdiction (AHJ).

2. Connect power to ionizer using appropriate voltage per the following. See figure 3.

AerBrush-01=12V DC

AerBrush-02=24V AC

AerBrush-03=120V AC

AerBrush-04=230V AC

3. For 120V AC and 230V AC models the installer shall provide a grounding method per the local AHJ.

4. For best results interlock ionizer with fan relay.

5. Apply power to unit. Confirm that green indicator light illuminates indicating that the ionizer is

functioning properly.

OPERATION

1. When power is supplied to the ionizer, the ionizer will be activated and will illuminate the green ion

indicator light.

2. The ionization unit is self-balancing and does not require any type of adjustment.

TROUBLESHOOTING

If the unit is not working, check the following:

1. The supply fan is running and that the green light illuminates.

2. Check the power input connections to the ionization unit. Verify all connections are correct and

tightened. Reconnect any loose wires as necessary.

Aerisa

1214 W. Boston Post Road, Suite 410, Mamaroneck, NY 10543

Tel: 480-302-6300