Alto AMX-100 Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Mezclador de música Alto AMX-100. Alto AMX-100 20 páginas. Compact mixer with digital effect
Imprimir página
4. CONTROL ELEMENTS
INPUT/OUTPUT CONNECTORS
22 TAPE IN
Use the Tape input to connect a CD Player , Tape, DAT, iPOD
or any other line-level source. Y ou can send this signal either
to CONTROL ROOM OUTPUT and / or to the MAIN MIX
OUTPUT using the relative 2TK TO select buttons.
TAPE OUT
These RCA jacks will route the main mix signal into a tape
or DAT recorder .
23 PHONES
This socket will be used to send the signal to a
headphone.
24 AUX SENDS
This 1/4" phone socket is used to send out the
signal from the AUX Bus of the input channels
into external devices such as effect units
and / or stage monitors.
25 STEREO AUX RETURNS
Y ou can use these stereo 1/4" phone sockets to
return the stereo signal of an effect unit to the
MAIN MIX. Alternatively you can use them as an
extra auxiliary input using the AUX RETURN level
control as volume control.
26 CONTROL ROOM OUTPUT
These 1/4" phone sockets will be used to send
the signal to a pair of powered Studio Monitor
speakers or to a second set of PA.
27 MAIN MIX OUTPUT
This stereo output is controlled by the MAIN MIX
LEVEL and will send the audio signal to an external
amplifier . The output level can be varied from -
+10 dB.
23
PHONES
AUX SENDS
AUX SENDS
24
STEREO AUX RETURNS
LEFT(MONO)
RIGHT
25
to
22
2-TRACK IN/OUT
L
R
TAPE IN
TAPE OUT
27
MAIN MIX OUTPUT
LEFT
LEFT
RIGHT
CTRL ROOM OUTPUT
LEFT
RIGHT
26
9