Camec Elite Pro2 EM305 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Accesorios para automóviles Camec Elite Pro2 EM305. Camec Elite Pro2 EM305 20 páginas. Caravan mover

Imprimir página

1. Troubleshooting

INTRODUCTION

Congratulations on choosing the Camec Elite Pro

according to very high standards and has undergone careful quality control procedures.

By simply using the remote control handset you can move your caravan effortlessly into any position required within

operating guidelines. Soft start and soft stop technology allows you to manoeuvre your caravan accurately without any

shocks.

The caravan manoeuvring system consists of two 12V motor-power rollers, a 12V electronic control unit and a

remote control handset. To function, the motor-powered rollers must be engaged against the tyres of your caravan.

The Camec Elite Pro

2 EM305 Caravan manoeuvring system is provided with an automatic engaging system. By

pushing two buttons on the remote control, both motor-powered rollers will make contact with the tyre. Once this is

done, the manoeuvring system is ready for opreation. The remote control will allow you to move your caravan in any

direction. You can even rotate the caravan on its own axis, without moving forwards or backwards.

Before proceeding with installation and starting to use the manoeuvring system, please read

this manual very carefully and be aware of all the safety instructions! The owner of the caravan

will always be responsible for correct use. Keep this manual inside your caravan for future

reference.

INTENDED USE

The Camec Elite Pro

2 EM305 caravan manoeuvring system is suitable for single axle and double axle caravans.

Suitable only for L-profiled and U-profiled chassis with a chassis thickness between min. 2.8mm and max. 3.5mm.

Depending on the weight of the caravan, the manoeuvring system cannot overcome obstructions that are more than

about 2cm in height without assistance (please use wedges as a ramp).

The standard installation kit only provides parts for installing the caravan manoeuvring system within the

measurements given in Fig. 2.

SPECIFICATIONS

Designation

Operational voltage

Average current consumption

Maximum current consumption

Speed

Weight (2 motor set)

Permissible overall Weight single axle (2 motors)

Permissible overall Weight double axle (2 motors)

Permissible overall Weight double axle (4 motors)

Minimum width (caravan/trailer)

Maximum width (caravan/trailer)

Maximum tyre width

Power source (battery)

2 EM305 caravan manoeuvring system. This has been produced

Camec Elite Pro

12 Volt DC

30 Ampere

120 Ampere

approx. 11cm per sec.

approx. 33kg (exclusive battery)

2000kg (1750kg on 18% gradient)

3000kg (2350kg on 18% gradient)

1800mm

2500mm

205mm

LiFePO

: 12V, 20Ah (recommended Camec Elite Pro

EM305) Lead acid: 12V, 80Ah (min.)

CAMEC ELITE PRO

2 EM305

Ref: ELITE PRO 2 EM305-0715Rev.A.

EM305