Alto ELVIS 12 MKII Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Altavoces Alto ELVIS 12 MKII. Alto ELVIS 12 MKII 14 páginas. Passive models
También para Alto ELVIS 12 MKII: Manual de servicio (17 páginas)
Imprimir página
HOOK
2. QUICK START - PASSIVE SPEAKER CABINET
UP
Passive, Full-range, two speakers. This is the simplest set-up. You just need a
mixer and a stereo amplifier. It is good for small club gigs, disco,etc.
Make all initial connections with all the equipments powered off, and ensure that
all the main volume controls are turned down completely.
1). Connect one side of the speaker cable to the Output CHA/CHB or Binding
Post of your stereo power amplifier and the other side to the Input socket
of your Elvis MKII speaker cabinet.
2). Complete other connections as illustrated.
3). Turn on your mixer first, then the stereo power amplifier.
4). Turn up the volume controls of your amplifier to about 70%.
5). Use PFL function to get the proper input level for the mixer, and adjust the
Main Mix Level control to manipulate the output level.
6). After use, turn off your stereo power amplifier first, then the mixer.
If you use a powered mixer for the passive speakers, it is no need to use an
amplifier. make sure all the main volume controls of your power mixer are turned
down completely.
1). Connect one side of the speaker cable to the SPEAKER OUT of your powered
mixer and the other side to the Input socket of your Elvis MKII speaker cabinet.
2). Use PFL function to get the proper input level for the mixer, and adjust the
Main Mix Level control to manipulate the output level.
3). After use, turn down of the Main Mix Level control first, then turn off the
powered mixer.
LINE IN
STEREO AMPLIFIER
SIG CLIP PROT
SIG CLIP PROT
20
20
18
22
18
22
16
24
16
24
12
26
12
26
CH1
6
28
CH2
6
28
30
(dB)
30
(dB)
MAIN OUT L
POWERED MIXER
D1
500W 2
500W 2
MIXER
APM120
LTO
R
12 CHANNEL 1000 WATT POWERED MIXER WITH
LINE IN
24-BIT MULTI-EFFECTS PROCESSOR
MAIN OUT R
2