Alto ELVIS10 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Altavoces Alto ELVIS10. Alto ELVIS10 14 páginas. Elvis series passive full-range speakers
También para Alto ELVIS10: Manual del usuario (7 páginas), Manual del usuario (14 páginas)
Imprimir página
- 1. For Passive Full-Range Speakers
- 2. For Active Subwoofer & Satellite Speakers
- 3. Passive Full-Range Speaker for Elvis10/Elvis12/Elvis15/Elvis12M
- 4. Active Full-Range Speaker for Elvis10A/Elvis12/Aelvis15A/Elvis12Ma
- 5. Active Subwoofer Speaker for Elvis12Sa/Elvis15Sa
- 6. Elvis Technical Specifications
-. For Active Subwoofer & Satellite Speakers
1). Connect one side of signal cable at your audio mixer in to Output Left /Right (with Stereo-Jack or XLR) and the other
side of the cable in to the Left / Mono Input (COMBO) of the active subwoofer; with the second signal cable connect
the Left Output of the subwoofer (Stereo/Mono-Jack or XLR) to the Line Input (COMBO) of the active satellite (with
Stereo - Jack or XLR).
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control fo the active speaker cabinets.
5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the
output level.
6). After using, turn off your active speaker cabinets first, then the mixer.
Power Cord
Tripod
Mount
QUICK START
Elvis Active Subwoofer & Satellite Speakers
Main Mix
Signal Cable
Signal Cable
Left
Right
Main Mix
Output
Output
6
Tripod
Mount