Alto M5A Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Altavoces Alto M5A. Alto M5A 16 páginas. Passive & active models
También para Alto M5A: Manual del usuario (11 páginas)
Imprimir página
-. Features of the Active Models
(1) Power Indicator
This blue LED lights up when the M series active monitor are powered on.
(2) Power Switch
This switch is used to turn the M series active monitor on or off.
Caution: Make sure your supply voltage is identical with the value marking
on your monitors before turning the power switch on.
(3) AC Socket with Main Fuse
This socket is used to connect your M series active monitor speaker with
the mains. Fuse replacement should be done by qualified personnel only,
and only with same value fuse.
(4) NEAR or FAR Field Selector
Via this switch, you can use your M series monitors in the near field or far
field configuration. Generally, near field option is designed for near distance,
and the speakers are placed relatively close to the listener, normally about
1~1.5m. As for far field option, it is usually designed for the larger sound
systems, where the monitor speakers are placed comparative farther away
from the listener.
(5) SENSITIVITY Control
Adjust this trim pot to get the proper input gain.
(6) SIGNAL INPUT
This COMBO connector is used to input the program sources either in balanced
or unbalanced configuration. You can use either 1/4 jack or XLR connector.
(7) OUT/LINK
This balanced XLR connector is linked in parallel with the SIGNAL INPUT, and
it can be used to output the input signal directly to another active monitor.
4. PANEL CONTROLS
(1)
M5A
M
SERIES MONITOR
HIGH FREQUENCY AMP-60 WATT (FULL RANGE)
LOW FREQUENCY AMP-130 WATT (FULL RANGE)
ON
(2)
NEAR
POWER
SW
OFF
(4)
FAR
(3)
Use only with a 250V fuse
110-120VAC~4A 60Hz
LTO
R
MODEL
SERIAL
SENSITIVITY
-30
(5)
dB
+6
OUT/LINK
(7)
BALANCED
SIG.INPUT
BAL/UNBAL
(6)
5