Alto MICRO4A Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Altavoces Alto MICRO4A. Alto MICRO4A 8 páginas. Micro series monitors passive & active models
También para Alto MICRO4A: Manual del usuario (8 páginas)

Imprimir página

2. PANEL CONTROLS

-. For MICRO series Passive Monitor Speakers: MICRO 3/4

(1) Power Indicator

This LED lights up blue when the MICRO series active speaker is powered on.

(2) Power Switch

This switch is used to turn the MICRO series active speaker on or off.

Caution: Make sure your supply voltage is identical to the value marking on

your products before turning on the power switch.

(3). VOLTAGE SELECTOR

There are two kinds of voltages for your operation. By this switch you can

select the voltage at 115V or 230V.

(4) AC Socket with Main Fuse

This socket is used to connect your MICRO series active monitor speakers

with the mains.

NOTE: Before turn on the power, please make sure the voltage is identical

to the values marking on the products. Replace the fuse with the same type

by the qualified personnel only.

(5) OUT/LINK

This balanced 6.3

(6) SIGNAL INPUT

This balanced MIC connector is used to input the program sources in balanced

configuration.

(7) VOLUME Control

Adjust this trim pot to get the proper input gain.

(5)

(6)

(7)

(1)

(2)

MIC connector can be used to link the speaker output.

30WATTS

Signal Input

LTO

MIN

MAX

VOL

MICRO 3A

CONTINUOUS 30 WATTS

MODEL

SERIAL

POWER

OFF

Use only with a 250V fuse

115V

230V

210-240: 1.0A 250VAC

90-120: 2.0A 250VAC

(3)

(4)