Alto PAM5 Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Altavoces Alto PAM5. Alto PAM5 10 páginas. Pam series active/passive live monitor
Imprimir página
- 1. Safety Instructions
- 1. 1 PAM5 Passive Live Monitor
- 1. Quick Start - Passive Speaker Cabinet
- 1. Input / Link Connections
- 1. Wire Connections
- 2. Table of Contents
- 2. 2 PAM5A Active Live Monitor
- 2. Quick Start - Active Speaker Cabinet
- 2. Control Elements for PAM5A Rear Panel
- 3. 3 PAM5T Installation Speaker Cabinet
- 3. Quick Start Passive - Line 70.7/100V Connection
- 3. Control Elements for PAM5T Rear Panel
- 4. 4 Technical Specifications
2. PAM5A Active Live Monitor
2.1 Quick Start - Active Speaker Cabinet
Make all initial connections, with the power switches Off for all equipment and main volumes are closed.
Connect one side of the signal cable at your audio mixer in to Output Left - Right (with Stereo - Jack or XLR) and
the other side of the cable in to the Line Input (Combo) of your active speaker cabinet. Start always with the LINE
switch sensitivity in +6dB positions.
Caution: The Line Input (Combo) and Link (XLR) are connected in Balanced or Unbalanced mode (Positive 2 /
Negative 3 / Ground 1).
The input with RCA connector, work in direct mode and by-pass the Volume control.
2.2 Control Elements for PAM5A Rear Panel
(1) Power Indicator
This LED lights up blue when the PAM5A active speakers are powered ON.
(2) Power Switch
This switch is used to turn the PAM5A active speakers ON or OFF.
Caution: Make sure your supply voltage is same to the value printed on the rear panel, before turn on the
switch, (230V - 50Hz # 115V - 60Hz).
-10dB INPUT
(9)
INPUT
LINE
MIC
(7)
LINK
(6)
VOLUNE
MODEL
(5)
Max
SERIAL
AC~220-240V
FUSE 2A
50Hz
(4)
(3)
CLIP
(10)
(8)
SENSITIVITY
MIC
LINE
45dB
6dB
LTO
R
PAM5A
(1)
ON
POWER
(2)
OFF
5