Acoustic Research PW1000 Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Protector contra sobretensiones Acoustic Research PW1000. Acoustic Research PW1000 6 páginas. Home theater power station with speed pass

Imprimir página

Ethernet

PW1000 Back Panel

Switch

SETUP

NETWORK

OUT

Modem

or Router

The PW1000 uses AR PureCurrent™ power conditioning to clean the power that goes to

Power /

your home theater components and portable devices. It also protects these devices and

Charging /

components from harmful surges. Its 10 AC outlets are split into two types: 4 Always-On

Signal

Protection

outlets for components you want to keep powered all the time, and 6 Switched outlets you

SETUP

Back Panel

1. Make sure the PW1000 is unplugged.

2. Connect a network cable from the output of your modem or router to the IN port in the ETHERNET switch

section on the PW1000 back panel.

3. Connect network cables from the Ethernet ports on your three devices to the PORT 1, PORT 2, and PORT 3 jacks

on the back of the PW1000.

IMPORTANT: Use the Ethernet ports on the back of the PW1000 for

network components that are more or less permanent fixtures in your home

entertainment rack, like a connected TV, your Blu-ray player, or a Wi-Fi router.

The Ethernet port on the front panel is best for network components that are

just visiting or that you set in front of your home theater, like a laptop or a

gaming system.

Connected Devices

4. Plug in the PW1000 and turn it on.

The POWER light in the ETHERNET section on the front panel of the PW1000 turns on and stays on.

The PORT indicators on the PW1000 front panel turn solid blue for each PORT where there is a device

connected. These indicators blink when data is being transmitted to or from that device.

Front Panel

The front of the PW1000

offers 2 always-on

AC outlets and 2 USB

charging ports. These

outlets and ports work

whenever the PW1000 is operational.

PW1000 Front Panel