Clearbox nControl Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Herramientas Clearbox nControl. Clearbox nControl 6 páginas. Configuration tool

nControl Configuration Tool User Manual

Revision: 0.1

Clearbox Work Instruction

Figure 5: Remove Device Settings window.

4.2.1 Identifying Information

Serial Number: This is the serial number coded on the unit. This can be compared to the serial

number located on the unit itself to ensure the correct unit is being configured.

MAC Address: This is the unique identifier associated with the Ethernet port for which the network

settings are being configured.

Subsys / Site Name: This piece of information is only used if the unit is installed with Newpoint

Compass software.

The network settings can be configured manually or if a DHCP server is running DHCP can be used.

Note: If the DHCP option is checked but no DHCP server is running this can make the device appear

slow or unresponsive until the unit times out trying to retrieve an IP address.

Once the settings are configured as required click "OK" for them to take. A confirmation window will

appear to confirm the changes.

Clearbox Systems Pty. Ltd. |Commercial In Confidence

6/ 6