Divine Lighting Hyper 361 P Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Luz de inundación Divine Lighting Hyper 361 P. Divine Lighting Hyper 361 P 15 páginas.

www.divinelighting.com

Adjusting built-in programs（Pr- -）

1. Press MENU to go back to the initial setting

2. Press UP / DOWN until Pr—

3. Press ENTER to choose, the display will flash at this moment

4. Press UP / DOWN to find the desired program number

5. Press ENTER to select and store the current menu options. The unit will retain

this setting even after the power has been cycled.

 Master/Slave: All of the units are connected together so that the output of the

first (Master) are mirrored in all of the other units (Slaves)

Master：Units are always set in Master mode (i.e. outputting DMX signal that mirrors

their own operation) unless they are set in DMX (which is also Slave mode). Signal lines

longer than 60 meters or 20 fixtures should utilize a signal amplifier.

Slave：Connect all the slave units to the master unit using DMX cable. Set all slaves

to DMX mode and address them to channel 1 (A001). Any adjustments made to the master

should be displayed on the slaves as well.

 XLR cable：(DMX Cable)

XLR/DMX connections are connected male to female, as shown below:

pin 1:ground,pin 2: negative signal, pin 3: positive signal

8. Master/Slave Operation

9. XLR Cable Connections

Hyper 361 P v1.0